Messages

1

Trade Pulse Support / Can I use groups this way?

« on: December 21, 2015, 06:39:16 PM »

Hi,

I have a couple of questions about groups that I hope you can help me with.

I'm using v1.0.46 with php 5.4

First, in a few forum posts I've read about the OUT 'gg' parameter.  However, the online manual currently only seems to mention a 'g' parameter.  Which is correct?  If 'gg' then where can I read about 'gg'?

Second, what I actually want to try an do is to arrange that traffic arriving from a trade in group A only trades with other sites in group A while traffic arriving from trades in group B only trades with other sites in group B.  I know this has been asked before in various ways - but is there an accepted way of achieving this?  I can do php code if necessary.

Thanks,
Andrew

2

Trade Pulse Bug Reports / Re: version 1.0.7 build 39 cannot add network details

« on: April 10, 2012, 04:40:47 AM »

Email sent - pointing to this topic - thanks

3

Trade Pulse Bug Reports / Re: version 1.0.7 build 39 cannot add network details

« on: April 07, 2012, 04:19:49 PM »

It's been a while and I still have this problem - all sites are now at build 1.0.9 44 - I can add new entries  on sites where I already have a network defined but cannot add the first new entry on a site where there is not yet any network defined.  This refers to the Network->Manage page

Feels like I need to touch a file or something to allow this - any chance of a quick workaround - I could really use this just now

Thanks

4

Trade Pulse Support / Re: How to reset referrers and detailed stats

« on: December 03, 2011, 04:22:03 PM »

Ok ip0li, thanks - maybe you could add that to the list of feature requests? 

5

Trade Pulse Support / How to reset referrers and detailed stats

« on: December 02, 2011, 03:57:34 PM »

Hi,

Doing 'reset' on a trade resets the numeric stats (ins, outs etc).  I want to clear the referer list for a trade - how can I do that please?

Thanks,

6

Trade Pulse Bug Reports / Re: Bulk update doesn't clear update available

« on: November 12, 2011, 04:13:28 PM »

Ok Kildoozer - thank you

7

Trade Pulse Bug Reports / Bulk update doesn't clear update available

« on: November 12, 2011, 03:45:38 AM »

I'm using bulk update to update from 1.0.7 build 39 to 1.0.7 build 41.  When I go to a site that has been the target of a bulk update, the version number at the top of the page correctly shows 1.0.7 build 41 but there is still the 'Update Available' link next to it.  Refreshing the page doesn't help. clicking the update available link says I have the latest version, doesn't offer any files to download and leaves the update link there.  Same on settings-updater

8

Trade Pulse Bug Reports / Re: Network stats errors - build 1.0.7 39

« on: October 24, 2011, 01:42:09 PM »

Ok - here's an update on this one...

As you see from my screencaps, one of the major discrepancies was in the notrades value (and when I posted this was WAY out across all my sites) - well, it's two days later now and somehow the notrades values are now correct in the network manager screen.  On the one hand that is good (because they're correct) but on the other it's not so good (why was it wrong in the first place).

However, the productivity values are still different - but I think I know why.  The site productivity seems to be calculated from the total IN and CLICKS in the bottom row - ok.  In the network screen the CLICKS figure seems not to include the NOTCOUNTED amount from the site and the network prod figure is calculated using the INs and CLICKs on the network page.

From a site management perspective I would expect the network page to show me EXACTLY what I would see if I went to the site itself.  I don't mind if NOTCOUNTED is in or out I expect the figures be consistent

Thanks

9

Trade Pulse Bug Reports / Network stats errors - build 1.0.7 39

« on: October 22, 2011, 03:19:06 PM »

I am once again seeing a discrepancy between my network stats screen and the stats on the actual sites in the network.

Since upgrading to 1.0.7 39 I'm seeing this across my entire network.  All my sites are currently at 1.0.7 39

Attached are captures for one site.  The first is the stats from the actual site; second is how it's reported on network stats.
The IN valuesa are correct but that is all - all the other values are way out.

I have (re)set the cache timeout to nocache and refreshed all the stats.  I have double checked the updater and versions

10

Trade Pulse Bug Reports / Re: version 1.0.7 build 39 cannot add network details

« on: October 22, 2011, 03:13:13 PM »

Thanks ip0li

11

Trade Pulse Bug Reports / version 1.0.7 build 39 cannot add network details

« on: October 19, 2011, 02:57:04 AM »

I'm trying to add a site to my network list.

If there are already sites in my network list then I can add more without any problem.

However, if my network site list is currently empty (if I have never had any sites in the list) then I cannot add a new site to the list.

I see this consistently across many sites in my network - all sites are at build 39

12

Trade Pulse Support / Re: Why is the skim % of one of my trades less than 100?

« on: October 01, 2011, 04:44:45 AM »

If you have links to trades, eg, toplist links on your page then clicks by traffic from that trade on your toplist will count as traffic to trades - this lowers the effective skim.

13

Trade Pulse Support / Re: New trades go into group '0'

« on: September 24, 2011, 08:31:52 PM »

Hi

Builds since 31 seem not to remember the default group correctly

I have a number of sites at various build versions and I see different effects here
- build 30 does not show the '0' group; the upgrade to build 30 seemed to choose the 'first' of my groups as the default group for new trades; I can change the default group successfully in the setting page
- builds 31 thru 34 have the '0' group which is chosen by the upgrade as the default new trade group; if I try to select a different default group in the setting page then the choice is not remembered (it reverts to '0')

14

Trade Pulse Bug Reports / Re: Update to build 31 takes two updates

« on: September 24, 2011, 08:19:45 PM »

Hi Kildoozer

Thanks for the reply - I originally posted this when build 31 was the latest and was just noting the unusual feature of needing two updates to get from 27 to 31. 

I've double checked all my instances of updater.php and they are the right size - I can successfully update to the most recent build (currently 34)

So, no problem

15

Trade Pulse Support / New trades go into group '0'

« on: September 21, 2011, 06:31:52 AM »

I've noticed that recently (probably since the default group feature was introduced) if I just accept the default installation values then all new trades end up in a group called '0' and we no longer have the concept of a new trade in no groups at all - that's fine by me as I do intend to set a default group - but I'm just wondering is this group '0' by design?