Topics

1

Trade Pulse Support / Can I use groups this way?

« on: December 21, 2015, 06:39:16 PM »

Hi,

I have a couple of questions about groups that I hope you can help me with.

I'm using v1.0.46 with php 5.4

First, in a few forum posts I've read about the OUT 'gg' parameter.  However, the online manual currently only seems to mention a 'g' parameter.  Which is correct?  If 'gg' then where can I read about 'gg'?

Second, what I actually want to try an do is to arrange that traffic arriving from a trade in group A only trades with other sites in group A while traffic arriving from trades in group B only trades with other sites in group B.  I know this has been asked before in various ways - but is there an accepted way of achieving this?  I can do php code if necessary.

Thanks,
Andrew

2

Trade Pulse Support / How to reset referrers and detailed stats

« on: December 02, 2011, 03:57:34 PM »

Hi,

Doing 'reset' on a trade resets the numeric stats (ins, outs etc).  I want to clear the referer list for a trade - how can I do that please?

Thanks,

3

Trade Pulse Bug Reports / Bulk update doesn't clear update available

« on: November 12, 2011, 03:45:38 AM »

I'm using bulk update to update from 1.0.7 build 39 to 1.0.7 build 41.  When I go to a site that has been the target of a bulk update, the version number at the top of the page correctly shows 1.0.7 build 41 but there is still the 'Update Available' link next to it.  Refreshing the page doesn't help. clicking the update available link says I have the latest version, doesn't offer any files to download and leaves the update link there.  Same on settings-updater

4

Trade Pulse Bug Reports / Network stats errors - build 1.0.7 39

« on: October 22, 2011, 03:19:06 PM »

I am once again seeing a discrepancy between my network stats screen and the stats on the actual sites in the network.

Since upgrading to 1.0.7 39 I'm seeing this across my entire network.  All my sites are currently at 1.0.7 39

Attached are captures for one site.  The first is the stats from the actual site; second is how it's reported on network stats.
The IN valuesa are correct but that is all - all the other values are way out.

I have (re)set the cache timeout to nocache and refreshed all the stats.  I have double checked the updater and versions

5

Trade Pulse Bug Reports / version 1.0.7 build 39 cannot add network details

« on: October 19, 2011, 02:57:04 AM »

I'm trying to add a site to my network list.

If there are already sites in my network list then I can add more without any problem.

However, if my network site list is currently empty (if I have never had any sites in the list) then I cannot add a new site to the list.

I see this consistently across many sites in my network - all sites are at build 39

6

Trade Pulse Support / New trades go into group '0'

« on: September 21, 2011, 06:31:52 AM »

I've noticed that recently (probably since the default group feature was introduced) if I just accept the default installation values then all new trades end up in a group called '0' and we no longer have the concept of a new trade in no groups at all - that's fine by me as I do intend to set a default group - but I'm just wondering is this group '0' by design?

7

Trade Pulse Bug Reports / Update to build 31 takes two updates

« on: September 16, 2011, 04:32:01 PM »

I'm seeing a 'feature' when updating from build 27 to build 31.

Initially the 'update available' link shows; I click it and get an update to build 30 and the update link goes away.  Then, some time later, I see 'update available' again, and this time when I click it I get an update to vtop.php and the build number goes to 31. 

Probably not a problem, but a bit odd nonetheless.

8

Trade Pulse Bug Reports / Updater error for settings.php build 27 to 29

« on: September 09, 2011, 07:27:45 PM »

I currently have build 27 on my sites.  When I try to update to build 29 I receive the following error

  Some files were updated with an errors.

    * tp/settings.php

  Please, change the permisions on these files to "777"

However, all php files in the tp directory are already 777 including settings.php - I have double checked this.

After I do the above update the main TP page shows that I am now at build 29 but that there is an update available.  If I retry the update I get the same error.
I've tried this on two different sites with the same result.

9

Trade Pulse Bug Reports / Blacklist not stored when doing delete at all sites

« on: July 05, 2011, 02:22:52 PM »

I'm not sure if this is a bug or a feature request...

TP 1.0.5 build 27 on all sites.

A trade signed up at all of my TP sites.

I deleted the trade from one of my TP sites via the 'delete' item on the 'more' icon on the main stats page.  I selected to blacklist the trade domain, ip and email.  I also selected the option to 'delete at your other sites' and selected all of my other TP sites.

The trade was correctly deleted at all of the other sites but it was not blacklisted at the other sites (it was successfully blacklisted at the site where I was doing the delete).

Please could you fix it so that the blacklist setting is also set at the other sites?

Thanks

10

Trade Pulse Bug Reports / Blacklist doesn't work for bulk signups

« on: July 05, 2011, 02:18:03 PM »

TP 1.0.5 build 27 on all sites.

I have a cheater site on my blacklist at a few of my TP sites

Yesterday, that cheater site somehow managed to sign up for trades at all my TP sites, including those at which the cheater is blacklisted.

All of the signups were within 1 minute of each other so I'm assuming the signups were via pulse trades or some other network feature.

I would have expected the blacklist entries to have been honoured.

Thanks.

11

Trade Pulse Bug Reports / Sort by scheme doesn't

« on: June 12, 2011, 04:40:18 PM »

v 1.0.5 Build 27.  I'm using the custom layout.  I have named (ie not numeric) skim schemes.  Clicking on the 'sch' heading to sort by scheme does not sort by scheme - it does change the sort order but I can't quickly see what it is sorting by.

12

Trade Pulse Feature Requests / Network management release level warning

« on: June 12, 2011, 12:12:09 AM »

After this topic, http://forum.scriptpulse.com/index.php/topic,1003.0.html I would request that the network manager or stats page give a warning if another site in the network is not at a compatible release level

13

Trade Pulse Bug Reports / network stats disappear when changing password or clearing cookies

« on: April 29, 2011, 08:56:09 PM »

Earlier this month I changed my TP login password for all my TP sites.  I have 30 something sites and I changed the password on all of them.  I noticed two undesirable knock on effects from this.  One was just a bit annoying the other is a real problem.  

I'm using Firefox 3.6 with TP build 22 (I'm still on build 22 because later builds have net stats display problems)
 
First, no matter what I seem to do I cannot seem to get my cookies to consistently keep me logged in to all my sites.  After each password change I re-logged in to my site stats ticking 'remember me'.  But for about half of my sites it just simply refused (and still refuses) to remember me.  This was a bit annoying but I'm living with it for now.

Second, and moe important, I use one of my sites as my main network stats centre and when I re-logged in to that site, my network stats and network manager were empty.  With no way to bulk enter network site details I just knuckled down and retyped all 30 or so network entries.

I still had the login cookie issue so I eventually tried clearing my browser cache and cookies to try and get it to remember my logins.  To my horror, this resulted in my network stats and manager disappearing again.  

This time I did a bit of investigation.  I'm guessing that the (encrypted) ms_list file holds the list of network sites - interestingly this file was still quite large just after I cleared the cookies (but after I'd lost access to the network sites) but as soon as I started to re-add the sites it shrank and then grew as I added sites.  Let me guess - it's encrypted using either my password or a key stored in a cookie, yes??  Well, it looks like something can go horribly wrong when either the password is changed or cookies are cleared.

Needless to say I eventually just typed the whole lot in again - but could you please investigate and fix (or work around) this ASAP?  As an initial approach I've suggested adding a bulk load for network details in the new features section.

Thanks

14

Trade Pulse Feature Requests / Bulk add or backup for network sites

« on: April 29, 2011, 04:27:56 PM »

Please could you add either a bulk add or backup feature for network sites?

Twice in the last month my network stats have 'disappeared' (I'll write about that separately in the bugs section) and I have had to add back 30+ sites into the network manager.  This is both frustrating and time consuming.  I can think of two features that would help greatly in this case
Either:
1.  A bulk add capability for network sites - just like bulk add for trades but for the network manager
Or:
2. Include the network multisite list in the daily backup somehow and provide the ability to restore it (preferably independently of the trade list)

Thanks

15

Trade Pulse Bug Reports / Mass edit sets all autostop values to zero

« on: March 12, 2011, 04:41:08 PM »

1.0.5 build 24.  As in the title, when I do a mass edit the six 'autostop if' fields are all initialised to '0' and when I click update the values get set to zero, thus overwriting any previously set value.

They need to be '--' by default

Thanks